Please wait while the policy is loaded. If it does not load, please click here.

INNOVATIVE TECH

LONGEVITY

EXPERT ADVICE

250 FR16 I-Joist Repair Flange Reinforcer

250 FR16 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 16 inch tall I-Joist with a 2.5″ flange.

from

$154.95

Quantity

Call a product advisor on

Easy to Install

Great for Existing Notches

Bolsters I-Joist Strength

Top or Bottom Notches

The Metwood 250 FR16 I-Joist Flange Reinforcer™

250 FR16 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 16″ tall I-Joist with a 2.5″ flange.

The I-Joist Flange Reinforcers™ are engineered light gauge steel attachments for engineered I-Joists allowing larger openings in floor joists. The Metwood patented and engineered I-Joist Flange Reinforcer™ simplifies the routing and installation of utilities while repairing and restoring the strength of floor joists weakened by the placement of large holes or notch cut-outs.

Our Metwood I-Joist Flange Reinforcers™ are shipped with the screws and drill bit needed for easy installation and are simply screwed to the side of the floor joist with no glue needed.

The 250 FR16 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of an I-Joist that measure 2.5″. If using the 250 series on a flange larger or smaller than that of 2.5″, the web area or the flange area may need to be padded out so the 250 series Joist Flange Reinforcer™ fits tight against the joist.

If you have notch cuts in I-joists for plumbing or if you need to route plumbing through your floor joists, the Metwood 250 FR16 I-Joist Flange Reinforcer™ I-joist repair kit is the answer.

Metwood 250 FR16 I-Joist Flange Reinforcer™ is a Patented, Engineered, and Tested product!

Check out our product brochure and installation instructions below to see how easy installation is with the 250 FR16 I-Joist Flange Reinforcer™ by Metwood Building Solutions or you can check out our 250 FR11 I-Joist Repair Flange Reinforcer™ for notch repair on 11 7/8 inch I-joists, our 250 FR14 I-Joist Repair Flange Reinforcer™ for notch repair on 14 inch I-joists, or our 250 WR I-Joist Repair Web Reinforcer™ for openings in the web portion of an I-joist.

Features

Drill Bit and Screws Included!

Engineered Repair

No Glue Needed

Tech Spec

Patented
YES!
Engineered & Tested
YES!
Weight
8 lbs
Dimensions
24 x 16 x 2.5 in

Applications

250 FR16 I-Joist Flange Reinforcers are designed to repair a notch cut from the top or bottom flange portion of a 16 inch tall I-Joist with a 2.5″ flange.

Call a product advisor

Highly recommended for I-joist repairs. We had a plumber who made so many holes in our joists but with the Metwood product they were no problem when it came time for inspection. Be sure you get the Metwood product because it is patented and tested and will be easily accepted by your county code building department.
Frank DeAngelo – Homeowner

FAQs

Some of your questions answered.

Feel free to call a product specialist at (540) 334-4294 and we can talk through your application to see if we can help or offer a different product to solve your I-Joist repair needs.

You can check out our I-Joist Repair Flange Reinforcer 250 FR11 for notch repair on 11 7/8 inch I-joists, our I-Joist Repair Flange Reinforcer 250 FR14 for notch repair on 14 inch I-joists, or our I-Joist Repair Web Reinforcer 250 WR for openings in the web portion of an I-joist.

All of our joist repair products are patented and tested!

No. You only need one I-Joist repair kit to repair and reinforce a notch in the flange of your I-Joist. If you have a hole through the middle of your I-joist you will need only one I-Joist Repair Web Reinforcer kit.

Other products

Rendering of a the Metwood 2810HR joist Repair Reinforcer applied to a HVAC hole in a wood joist.
The Metwood 2810HR™ Joist Repair Reinforcer allows the placement of a 6” diameter hole in a 2×10 or 2×12 wood joist and a 4” diameter hole in a 2×8.

from

$54.95
Add to cart
Rendering of the Metwood 250 FR11 I-Joist Flange Reinforcer applied to an I-joist notch for a PVC plumbing pipe.
250 FR11 I-Joist Flange Reinforcers™ are designed to repair a notch cut from the top or bottom flange portion of a 11-7/8″ tall I-Joist with a 2.5″ flange.

from

$154.95
Add to cart
Rendering of the Metwood 250WR I-Joist Web Reinforcer applied to an I-joist with a large hole.
250WR I-Joist Web Reinforcers™ are designed to repair an opening in the web portion of an I-joist up to 12 inches high by 16 inches wide.

from

$154.95
Add to cart

Metwood is a proud member of the following building associations where we actively advocate for the building industry:

Talk to a
product advisor

or call us at

250 FR16 I-Joist Flange Reinforcer

Talk to a Product Advisor

Send your details so one of our knowledgeable product advisors can call you back shortly.